Australia's leading custom made kitchens Free Call 1800 998 178
Customized Poly Tec laminated Benchtops
Benchtops supplied by www.SydneyBenchtops.com.au
benchtops have been around a long time and get better as
new technology comes along. If you're after a hard-wearing benchtop at
a great price you can't overlook a laminated benchtop. Our laminated
benchtop prices are some of the lowest on the market. We only use
well-known brands like Formica, Laminex, Polytec and Wilson art. All
these brands have a proven record for high quality materials and latest
fashion designs when it comes to benchtops.
Australia can customize your new benchtop and offer you a wide range of
edge profiles. Laminated benchtops have hundreds of options to suit
your lifestyle and taste. CLICK HERE FOR
The surface of Polytec’s LAMINATE benchtops are made from a stain-resistant melamine-based resin.The toughness and high impermeability of this surface means that Polytec’s LAMINATE benchtops should require no more than wiping with a soft cloth, dampened with plain water or a household detergent mix to remove all common household spills.Polytec’s LAMINATE benchtops should be cleaned as follows:
Using a mild household spray wipe down the benchtop with a soft cloth taking care not to rub too hard.
Dry using a soft cloth so as not to leave any solvent on the benchtop.
You may also use methylated spirit on a soft cloth, using a circular cleaning motion.
Thoroughly clean over the wider area with water and detergent on a damp cloth afterwards to remove any residual methylated spirit.
Always ensure that you refer to the recommendations provided by the cleaning product manufacturer before use.
To ensure that your Warranty will not be voided, DO NOT use any of the
following on Polytec's LAMINATE benchtops:
Commercial Cleaning Products, Abrasive Cleaners, Scouring Pads or Abrasive Papers, Solvents, Thinners, Turpentine (Turps), Ammonia, Bleach, Acetone, M.E.K. and any other cleaning agents containing Organic Solvents or the above mentioned products.
Please note: Polytec provides a limited seven (7) year warranty on all laminate and benchtop products.
The limited warranty covers:
workmanship & manufacturing defects.
If you detect anyproblems with your laminate or bench top you need to contactPolytec within 7 years from the purchase date.Failure to follow the above care instructions will result indamage to the laminate and voiding of your warranty. Polytec’s warranty does not cover general wear and tear.
Different edge profiles
Standard Square Edgeis a classic look that never dates. It is 2 separate pieces of laminate
that are glued on to the exposed sides of the benchtop. This finish can
be used on all standard laminates and high shine laminates. This edge is suitable for Caesarstone. Premium Tight Form /
Square Form edge
finish is a recently new edge finish. It only uses a
selected range of laminate mainly from the Laminex Square Form range.
The rolled edge is a 5mm radius on top and bottom. The laminates used on
this finish are specially designed for the tight angle the laminate is
finished at. This look is the closest finish you will find to a stone
benchtop edge finish. This is on a premium product and incurs an extra
fee. This edge is suitable for Caesarstone. Standard Bullnose Edge
is a classic. This is the most common edging on the market. It is a 16 x
16 mm radius. This finish can be used on all standard laminates and
high shine laminates. Standard Pencil Edge
a cost effective option for the same look as a Tight Form / Square Form edge. It
is an 8mm radius on the top and bottom edges. This finish can be used on
all standard laminates and high shine laminates. Standard Soft Edge
is a nice compromise between a square finish and a bullnose. It has the
look of a square flat edge with the soft corners of a bullnose. It has
a 10mm radius on the top and bottom edges. This finish can be used on
all standard laminates and high shine laminates. Standard 90 Degree R10 Edge
is a nice modern look. It has the top edge rounded with a 10mm
radius. This finish can be used on all standard laminates and high shine laminates. This edge is suitable for Caesarstone. Standard 90 Degree R16 Edge
is a very soft looking edge. It has the
top edge rounded with a 16mm radius. This finish can be used on all
standard laminates and high shine laminates. This edge is suitable for Caesarstone.
All Kitchen cabinets, benchtops & Splashbacks are custom made to your sizes
Australia's leading range of custom made kitchens
Free call 1800 998 178