Laminex laminate benchtop prices

Wilson art natural finish (32mm)
up 600mm deep $92 per lineal meter
up 800mm deep $143 per lineal meter
upto 1000mm deep $207 per lineal meter
upto 1200mm deep $333 per lineal meter

Wilson Art gloss finish (32mm)
up 600mm deep $125 per lineal meter
up 800mm deep $153 per lineal meter
upto 1000mm deep $217 per lineal meter
upto 1200mm deep $343 per lineal meter

Wilson art natural finish 
(40mm)
up 600mm deep $125 per lineal meter
up 800mm deep $166 per lineal meter
upto 1000mm deep $235 per lineal meter
upto 1200mm deep $372 per lineal meter

Wilson art gloss finish (40mm)
up 600mm deep $141 per lineal meter
up 800mm deep $188 per lineal meter
upto 1000mm deep $268 per lineal meter
upto 1200mm deep $426 per lineal meter

Other items to complete your new benchtop
End strips $25 each
Mitre joints with toggles $40 each
45 degree corner edges $5 each
extra rolled edge eg. bar front $15 per lineal meter
bubble wrap if requested $10 per meter

minimum order amount is $400

CLICK HERE TO



  
Different edge profiles


 Laminate sqaure benchtopLamiate tight form Bnehctops, laminex squareform benchtopsLaminate Soft edgeLaminate 90 degreeLaminate 90 degree R16Laminate bull noseLaminate pencil edge
  
                                                                

Laminate Square benchtop  Standard Square Edge is a classic look that never dates. It is 2 separate pieces of laminate that are glued on to the exposed sides of the benchtop. This finish can be used on all standard laminates and high shine laminates. This edge is suitable for Caesarstone.
Laminate Squareform benchtopsPremium Tight Form / Square Form edge
finish is a recently new edge finish. It only uses a selected range of laminate mainly from the Laminex Square Form range. The rolled edge is a 5mm radius on top and bottom. The laminates used on this finish are specially designed for the tight angle the laminate is finished at. This look is the closest finish you will find to a stone benchtop edge finish. This is on a premium product and incurs an extra fee. This edge is suitable for Caesarstone.
Laminate Bullnose edgeStandard Bullnose Edge
is a classic. This is the most common edging on the market. It is a 16 x 16 mm radius. This finish can be used on all standard laminates and high shine laminates.
Laminate pencil edge benchtopsStandard Pencil Edge
is a cost effective option for the same look as a Tight Form / Square Form edge. It is an 8mm radius on the top and bottom edges. This finish can be used on all standard laminates and high shine laminates.
Laminate Soft edge benchtopsStandard Soft Edge
is a nice compromise between a square finish and a bullnose. It has the look of a square flat edge with the soft corners of a bullnose. It has a 10mm radius on the top and bottom edges. This finish can be used on all standard laminates and high shine laminates.
Laminate 90 degree benchtopsStandard 90  Degree R10 Edge
is a nice modern look. It has the top edge rounded with a 10mm radius. This finish can be used on all standard laminates and high shine laminates. This edge is suitable for Caesarstone.
Laminate 90 degree R16 benchtopsStandard 90  Degree R16 Edge
is a very soft looking edge. It has the top edge rounded with a 16mm radius. This finish can be used on all standard laminates and high shine laminates. This edge is suitable for Caesarstone.



                              
    
                          

                          

       All Kitchen cabinets, benchtops & Splashbacks are custom made to your sizes


Click here for kitchen cabinet prices  Click here for kitchen benchtop prices  Click here for Splashback prices