BLUM HARDWARE | Life Time Warranty
top of page

BLUM DRAWER SYSTEMS

TANDEM

A feather-light glide

Tried and tested TANDEMBOX systems enable you to fulfil a wide range of customer requirements, The proven  TANDEMBOX antaro. All lines have a wide array of applications, ranging from standard solutions to special applications.

Unsurpassed running action thanks to the integrated TANDEM technology enhances opening and closing ease

​

  • Single and full extension

  • Nominal lengths of 270 - 600 m

  • Dynamic carrying capacity of 30 kg and 50 kg

  • Optional side stabilisation

  • ORGA-LINE

Soft-close BLUMOTION

for METABOX

METABOX drawers and pull-outs have just a few components. You can use the tried and tested box system for many different applications in kitchens, hallways, bathrooms and offices - and it's even suitable for workshops. Robust materials and careful workmanship produce high stability - up to a maximum dynamic carrying capacity of 30 kg

​

  • Installation heights: N, M, K, H, B, D

  • Nominal length: 270 – 550mm (dependent on height)

  • The side walls of high fronted pull-outs can be equipped with a single or double gallery

  • Single and full extensions available

  • BLUMOTION is an optional extra for METABOX single extensions

​

AVENTOS HF

For quality of motion and freedom of design

AVENTOS HF is the right solution for high and mid wall units with bi-fold fronts in kitchens and living areas.

  • Cabinet heights from 480 to 1040 mm

  • Cabinet widths up to 1800 mm

  • Only 3 lift mechanisms and 4 telescopic arms for all applications

  • Lift mechanisms and front fixing brackets can be used symmetrically

  • For wooden and aluminium frame fronts

BLUM AVENTOS

AVENTOS HL

The ultimate in ease and convenience

AVENTOS HL can even solve tricky applications, e.g. integration of electrical appliances into wall units.

  • Cabinet heights from 300 to 580 mm

  • Cabinet widths up to 1800 mm

  • 5 lift mechanisms and 4 lever arms for all applications

  • Can be used with cornice and crown mouldings

  • Lift mechanisms and front fixing brackets can be used symmetrically

  • For wooden and aluminium frame fronts

AVENTOS HS

Up & over systems for award-winning ease of use

AVENTOS HS offers a compact programme for large and heavy fronts.

  • Cabinet heights from 350 to 800 mm

  • Cabinet widths up to 1800 mm

  • 9 different lift mechanisms and one lever arm

  • Can be used with cornice and crown mouldings

  • Lift mechanisms and front fixing brackets can be used symmetrically

  • For wooden and aluminium frame fronts

AVENTOS HK

State-of-the-art stay lifts

AVENTOS HK presents a flexible programme and a wide range of planning options.

  • Recommended cabinet heights up to 600mm

  • Recommended minimum internal cabinet height of 170mm

  • Recommended minimum internal cabinet depth of 207mm

  • Cabinet widths up to 1800 mm

  • 4 lift mechanism types for all applications

  • Can be used with cornice and crown mouldings

  • Lift mechanisms and front fixing brackets can be used symmetrically

  • For wooden and aluminium frame fronts

  • Also available with TIP-ON

  • Front height and widths are subject to the power factor limits. For ergonomic reasons we recommend a maximum cabinet height of 600mm.

AVENTOS HK-XS

Compact fitting for small, high wall cabinets

AVENTOS HK-XS offers a wide range of design options for small high wall cabinets e.g. above the rangehood in the kitchen or in the bathroom over the sink.

  • Minimum internal cabinet height of 200mm

  • Minimum internal cabinet depth of 125mm

  • Suitable for cornice and crown mouldings

  • Lift mechanisms and front fixing brackets can be used symmetrically

  • For wooden and wide aluminium frame fronts

  • Also available with TIP-ON

BLUM HINGES

CLIP TOP BLUMOTION

Innovative technology integrated into the hinge boss

Why opt for an add-on if you can have it all in one? CLIP top BLUMOTION offers full hinge functionality and soft close!

  • 110° standard hinges for door thicknesses up to approx. 24 mm

  • 107° standard hinges for door thicknesses of 15 mm and above

  • 95° profile door hinge for thicker doors

  • Blind corner hinges

  • Angled applications from -50° to +50°

  • Aluminium frame hinges

  • 155° wide angle hinge with clip-on BLUMOTION

bottom of page